Select Store:
Select Currency:

Sick AFM60B-S1SA032768 (1054220)

Product Summary

Sick AFM60B-S1SA032768 (1054220)
Manufacturer: Sick
Manufacturer part number: 1054220
SKU: 196920
Weight(kg): 0.3330

Click here to check availability

Pricing - Condition Manufacturer New

£522.67 excl VAT
£503.33 excl VAT
  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)
  • Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60

Max. number of steps per revolution:32,768
Max. number of revolutions:4,096
Resolution power:32,768 x 4,096
Resolution:15 bit x 12 bit
Error limits:± 0.05 °
Repeat accuracy:0.002 °
Measuring step deviation:± 0.01 °
Initialization time:50 ms 1)
1) Valid positional data can be read once this time has elapsed  
Mechanical data
Mechanical interface:Solid shaft, Servo flange
Shaft diameter:6 mm
Mass:0.26 kg
Start up torque:0.5 Ncm (20 °C)
Operating torque:0.3 Ncm (20 °C)
Permissible Load capacity of shaft:40 N (axial), 80 N (radial)
Maximum operating speed:9,000 /min 1)
Moment of inertia of the rotor:6.2 gcm²
Bearing lifetime:3.0 x 10^9 revolutions
Max. angular acceleration:500,000 rad/s²
1) Self warming of 3.3 K per 1000 revolutions/min when applying note working temperature range  
Electrical data
Power consumption:0.5 W (without load)
Operating voltage range:4.5 V DC ... 32 V DC
Maximum output frequency:200 kHz
Load resistance min.:120 Ω
MTTFd: mean time to dangerous failure:250 a (EN ISO 13849-1) 1)
1) This product is a standard product and does not constitute a
safety component as defined in the Machinery Directive.
Calculation based on nominal load of components, average ambient
temperature 40°C, frequency of use 8760 h/a. All
electronic failures are considered hazardous. For more information, see document no. 8015532.  
Electrical interface:Connector M23, 12-pin, radial
Interface signals:Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential
Clock frequency:2 MHz 1)
SET (electronic adjustment):H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
CW/CCW (counting sequence when turning):L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
Signal before differential generation:± 20 %
Signal offset:2.5 V ± 10 %
Ambient data
EMC:(according to EN 61000-6-2 and EN 61000-6-3) 1)
Enclosure rating:IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529) 2)
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Working temperature range:-30 °C ... 100 °C
Storage temperature range:-40 °C ... 100 °C, without package
Resistance to shocks:70 g (according to EN 60068-2-27)
Resistance to vibration:30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
1)   2) With mating connector fitted  
Products specifications
Manufacturer Sick
Manufacturer category Sick AFM60A