Select Store:
Select Currency:

Sick AFS60A-BDEB262144 (1059068)

Product Summary

Sick AFS60A-BDEB262144 (1059068)
Manufacturer: Sick
Manufacturer part number: 1059068
SKU: 196966
Weight(kg): 0.3540

Click here to check availability

Pricing - Condition Manufacturer New

£490.88 excl VAT
£472.72 excl VAT
  • High-resolution 30-bit absolute encoder (18-bit singleturn and 12-bit multiturn)
  • Face mount flange, servo flange and blind hollow shaft
  • Connection type: 3 x M12 axial connector
  • Up to 125 µs on-the-fly data transfer speed
  • EtherCAT® interface CoE (CiA DS-301) Device profile (CiA DS-406)
  • Round axis functionality
  • Alarms, warnings and diagnostics functions for speed, position, temperature, operating time, etc.
  • Status display via 5 LEDs
  • Up to 16 adjustable electronic cam switches
  • Your benefits

  • Increased productivity as a result of intelligent diagnostics functions and rapid data transfer
  • Increase in network reliability due to early error detection
  • Simple installation with various configuration options
  • Flexible, easy setup and high resolutions for various applications with binary, integer and "decimal point" values based on round axis functionality
  • Maximum system availability through embedded switch technology
  • Compact and cost-efficient design

Max. number of steps per revolution:262,144
Max. number of revolutions:4,096
Resolution power:262,144 x 4,096
Resolution:18 bit x 12 bit
Error limits:≤ 0.03 °
Repeat accuracy:≤ 0.002 °
Measuring step deviation:± 0.002 °
Initialization time:Ca. 6 s
Cycle time:125 µs ... 100 ms
Mechanical data
Mechanical interface:Blind hollow shaft
Shaft diameter:10 mm
Mass:0.2 kg
Start up torque:0.8 Ncm (20 °C)
Operating torque:0.6 Ncm (20 °C)
Maximum operating speed:6,000 Hz 1)
Moment of inertia of the rotor:40 gcm²
Bearing lifetime:3.0 x 10^9 revolutions
Max. angular acceleration:500,000 rad/s²
Permissible movement axial static/dynamic:≤ 0.5 mm, ≤ 0.1 mm
Permissible movement radial static/dynamic:≤ 0.3 mm, ≤ 0.05 mm
Shaft material:Stainless steel
1) Self warming of 3.3 K per 1000 revolutions/min when applying note working temperature range  
Electrical data
Operating voltage range:10 V DC ... 30 V DC
MTTFd: mean time to dangerous failure:80 a (EN ISO 13849-1) 1)
1) This product is a standard product and does not constitute a
safety component as defined in the Machinery Directive.
Calculation based on nominal load of components, average ambient
temperature 40°C, frequency of use 8760 h/a. All
electronic failures are considered hazardous. For more information, see document no. 8015532.  
Electrical interface:3 x connector M12, 4-pin, axial
Bus interface:EtherCAT, CoE (CiA DS-301) 1)
Data transmission rate (baud rate):10 Mbit/s / 100 Mbit/s
Encoder profile:CiA DS-406
Endless operating functionality:0
1) EtherCAT® is registered trademark and patent technology, licensed by Beckhoff Automation GmbH, Germany.  
Ambient data
EMC:(according to EN 61000-6-2 and EN 61000-6-3) 1)
Enclosure rating:IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529) 2)
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Working temperature range:-30 °C ... 85 °C
Storage temperature range:-40 °C ... 100 °C, without package
Resistance to shocks:100 g (according to EN 60068-2-27)
Resistance to vibration:30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
1) The EMC according to the standards quoted is achieved if screened cables are used.  2) With mating connector fitted  
Products specifications
Manufacturer Sick
Manufacturer category Sick AFS60E