Select Store:
Select Currency:

Sick DFS60B-TGPM10000 (1036942)

Product Summary

DFS60B-TGPM10000 INCREMENTAL ENCODER 10000 Lines, 5?32V, TTL or HTL programmable
Manufacturer: Sick
Manufacturer part number: 1036942
SKU: 115744
Weight(kg): 0.5020

Click here to check availability

Pricing - Condition Manufacturer New

£324.48 excl VAT
£313.12 excl VAT


    • Compact installation depth
    • High resolution up to 16 bits
    • Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses
    • Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial
    • Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull
    • Mechanical interfaces: face mount or servo flange, blind or through hollow shaft
    • Remote zero set possible

Your benefits

  • Reduced storage costs and downtime due to customer-specific programming
  • Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation
  • Excellent concentricity even at high speeds
  • High resolution of up to 16 bits ensures precise measurements
  • Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime
  • Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs
  • Programmable zero pulse position simplifies installation



Error limits: ± 0.05 °
Measuring step: 90 ° / electronically/number of lines
Initialization time: 30 ms, 32 ms 1)
Pulses per revolution: 10,000
1) With mechanical zero pulse width  
Mechanical data
Mechanical interface: Through hollow shaft
Shaft diameter: 14 mm
Mass: 0.2 kg
Start up torque: 0.8 Ncm (20 °C)
Operating torque: 0.6 Ncm (20 °C)
Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm
Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm
Maximum operating speed: 9,000 /min
Moment of inertia of the rotor: 40 gcm²
Bearing lifetime: 3.6 x 10^10 revolutions
Max. angular acceleration: 500,000 rad/s²
Shaft material: Metal
Electrical data
Electrical interface: 4.5 V ... 32 V, TTL/HTL programmable, Cable, 8-pin, universal, 5 m
Connection type: Cable, 8-pin, universal, 5 m 1)
Maximum output frequency: 600 kHz
Reference signal, number: 1
Reference signal, position: 90 °, electronically, gated with A and B
Operating voltage range: 4.5 V ... 32 V
Load current max.: 30 mA
Power consumption: 0.7 W (without load)
MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 2)
1) The universal cable outlet is positioned in such a way, that it is possible to lay the cable in a radial or axial direction without kinking it  2) This product is a standard product and does not constitute a
safety component as defined in the Machinery Directive.
Calculation based on nominal load of components, average ambient
temperature 40°C, frequency of use 8760 h/a. All
electronic failures are considered hazardous. For more information, see document no. 8015532.  
Ambient data
EMC: (according to EN 61000-6-2 and EN 61000-6-3)
Working temperature range: -30 °C ... 100 °C
Storage temperature range: -40 °C ... 100 °C, without package
Resistance to shocks: 70 g (according to EN 60068-2-27)
Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529)
Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
Products specifications
Manufacturer category Sick DF60TP
Manufacturer Sick