Select Store:
Select Currency:

Sick KTL10W-P15 (1023419)

Product Summary

Contrast Scanner KTL10W-P15 PNP output for fiber optic cable
Manufacturer: Sick
Manufacturer part number: 1023419
SKU: 108150
Weight(kg): 0.3610

Click here to check availability

Pricing - Condition Manufacturer New

£941.57 excl VAT
£906.73 excl VAT


  • Very low jitter (< 10 µs)
  • Precise light spot
  • Best contrast resolution thanks to RGB LED technology
  • Two interchangeable light exits
  • Five storage banks for settings
  • Automatic drift correction
  • Fast switching frequency of 25 kHz
  • Easy-to-read bar graph display
  • Your benefits

  • Very precise detection of print marks enables optimal results for packaging and printing applications
  • All contrast marks, even pale yellow on white paper, can be reliably detected thanks to RGB LED technology
  • Automatic drift correction helps detect difficult to see marks, such as faded print marks, enabling higher production reliability
  • Reliable operation, even with high-gloss reflective surfaces, increasing throughput
  • Simple teach-in via an external signal can be performed while the material is moving, enabling shorter setup time
  • Long-lasting, tough metal housing

Dimensions (L x W x H):80 mm x 30.4 mm x 53 mm
Sensing distance:Dependent on the fiber-optic cablethe fiber-optic cable
Sensing distance tolerance:Dependent on the fiber-optic cablethe fiber-optic cable
Light source 1):LED red, green, blue
Light spot size:Dependent on the fiber-optic cable
Adjustment:Dynamic teach-in (min/max)
Function:Deactivation delay ... 20 ms
1) Wave length: 470 nm, 525 nm, 640 nm  
Supply voltage Vs 1):DC 12 V ... 30 V
Ripple 2):≤ 5 Vpp
Power consumption 3):< 150 mA
Switching frequency 4):25 kHz
Response time 5):20 µs
Jitter:< 10 µs
Switching output:PNP: HIGH = VS- ≤ 2 V / LOW approx. 0 V
Switching mode:PNP
Input, teach-in (ET) 6):PNP:
Teach: U = 10 V ... < UV
Run: U < 2 V
Input, blanking input (AT) 7):PNP:
blanked: U > 10 V ... < Uv
free-running: U < 2 V
Retention time (ET):25 ms, non-volatile memory
Connection type:Connector M12, 5-pin
Protection class 8):II
Circuit protection:Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
Enclosure rating:IP 67
Weight:Ca. 400 g
Housing material:Die-cast zinc
Output current Imax.:100 mA
1) Limit values  2) May not exceed or fall short of VS tolerances  3) Without load  4) With light/dark ratio 1:1  5) Signal transit time with resistive load  6) ET > 2 ms  7) AT > 200 µs  8) Reference voltage DC 50 V  
Ambient data
Ambient temperature:Operation: -10 ... 60 °C
Storage: -10 ... 75 °C
Shock load:According to IEC 60068
Products specifications
Registration Sensor Type Contrast Sensors
Manufacturer category Sick KT10
Manufacturer Sick