Sick S30A-7011CA (1023891)

• 7 m protective field range
• Four switchable field sets (four protective fields, eight warning fields)
• Configuration memory integrated in the system plug
• EFI interface for safe SICK device communication
• Selectable resolution for hand, leg or body detection
• Simultaneous monitoring of up to four protective fields
• Contour as reference for vertical applications
• Integrated external device monitoring (EDM)

Your benefits

• Largest protective field range in the market increases the variety of application possibilities
• Safety engineering - with no loss of productivity
• Quick recommissioning via configuration memory
• Expandable modular system, simple cabling and additional functions such as the simultaneous monitoring of up to four protective fields using SICK safety controllers with EFI
• Easy installation, commissioning and maintenance for stationary and mobile applications
• Decades of proven safety technology guarantee maximum reliability and productivity - even under difficult conditions
• Simple alignment and safe operation in vertical mode

Applications

Hazardous area protection (vertical):
Access protection (vertical):
Hazardous area protection (horizontal):
Functions
Number of simultaneously monitored protective fields:	≤ 4 1)
Static protective field switching:
Incremental encoder inputs:	-
External device monitoring (EDM):
Integrated configuration memory:
Expanded measured data output (CMS, RS-422):	-
Measured data output (RS-422):
Safe SICK device communication via EFI/SDL:
1) If more than one protective field is monitored simultaneously, then the safe output signals must be routed to safe outputs of a Flexi Soft safety controller, or via a safe EFI gateway.
Technical data
Laser class:	1 (21 CFR 1040.10 and 1040.11, DIN EN 60825:2001)
Enclosure rating:	IP 65 (EN 60529)
Protection class:	II (EN 50178)
Type:	Type 3 (IEC 61496)
Safety integrity level:	SIL2 (IEC 61508), SILCL2 (EN 62061)
Category:	Category 3 (EN ISO 13849)
Performance level:	PL d (EN ISO 13849)
PFHd:	8.0 * 1E-08 (EN ISO 13849)
TM (mission time):	20 a (EN ISO 13849)
Ambient operating temperature:	-10 °C ... 50 °C
Dimensions (W x H x D):	155 mm x 185 mm x 160 mm
Weight:	3.3 kg
Scan angle:	190 °
Protective field range:	7 m
Maximum warning field range:	49 m
Number of field sets:	4 1)
Number of monitoring cases:	4
Response time:	60 ms 2)
Resolution:	30 mm, 40 mm, 50 mm, 70 mm, 150 mm, configurable
Distance measuring range:	49 m
Number of multiple samplings:	Configurable 2 ... 16
Electrical connection:	System plug with or without connecting cable
Supply voltage:	16.8 V DC, 24 V DC, 28.8 V DC
Number of EDM inputs:	1
Number of reset-/restart inputs:	1
Number of static control inputs:	2
Number of static control inputs with EFI:	5 3)
Number of safe outputs:	2, Safety outputs (OSSD)
Number of application diagnostic outputs:	3 4)
Maximum output current:	500 mA
Configuration and diagnostics interface:	RS-232
Data interface:	RS-422
1) 1 field set = 1 protective field and 2 warning fields  2) Depending on basic response time and multiple sampling  3) In combination with an EFI device (Flexi Soft or EFI gateway) five static control inputs are available. Otherwise two.  4) Freely programmable, e.g., warning field, contamination, reset required