Select Store:
Select Currency:

Sick SKS36S-HVA0-K02 (1036557)

Product Summary

SKS36S-HVA0-K02 MOTORFEEDBACK HIPERFACE 128 Sine/Cosine Periods *** Bei der Inbetriebnahme ist das Implementierungshandbuch (Bestell-Nr. 8012332) zu beachten.
Manufacturer: Sick
Manufacturer part number: 1036557
SKU: 115388
Weight(kg): 0.2120

Click here to check availability

Pricing - Condition Manufacturer New

£201.96 excl VAT
£224.40 excl VAT

Downloads

  • Motor feedback systems for the standard performance range
  • 128 sine/cosine periods per revolution
  • Absolute position with a resolution of 4,096 increments per revolution and 4,096 revolutions with the multiturn system
  • Programming of the position value and electronic type label
  • HIPERFACE® interface
  • Integrated version and stand-alone design
  • Certified according to SIL2/PL d (only valid for SKS36S/SKM36S-H...)
  • Conforms to RoHs
  • Your benefits

  • The small dimension allows manufacturers of low-power and minimal-power motors to considerably reduce the size of their motors
  • The stand-alone version is ideally suited as a master and path encoders
  • The SKS/SKM36 motor feedback systems have strongly penetrated the drive technology market
  • The consistent mechanical components in SEK/SEL37 allow for a high degree of flexibility with various encoder systems

Safety-related parameters
Safety integrity level:SIL2 (IEC 61508), SILCL2 (IEC 62061)
Category:3 (EN ISO 13849)
Performance level:PL d EN ISO 13849 1)
TM (mission time):20 a (EN ISO 13849)
PFHD: probability of dangerous failure per hour:1.3 * 1E-08 2)
MTTFd: mean time to dangerous failure:100 a (EN ISO 13849)
1) For more detailed information on the exact configuration of your machine/unit, please consult your relevant SICK branch office.  2) The values displayed apply to a diagnostic degree of coverage of 90%, which must be achieved by the external drive system  
Performance
Number of sine/cosine periods per revolution:128
Number of the absolute ascertainable revolutions:1 (Singleturn)
Total number of steps:4,096
Measuring step:2.5 angular seconds (at interpolation of the sine/cosine signals with e.g. 12 Bit)
Error limits for the digital absolute value:± 320 angular seconds (via RS485)
Integral non-linearity typ.:± 120 angular seconds (Error limits for evaluating sine/cosine period)
Differential non-linearity:(Non-linearity within a sine/cosine period)
Operating speed:6,000 /min, up to which the absolute position can be reliably produced
Available memory area:1,792 Byte (EEPROM 2048)
Mechanical data
Shaft diameter:6 mm
Flange type/stator coupling:Servo-/face mount flange
Dimensions:See dimensional drawing
Mass:0.14 kg
Moment of inertia of the rotor:6 gcm²
Maximum angular acceleration:500,000 rad/s²
Operating torque:0.6 Ncm
Start up torque:0.9 Ncm
Life of ball bearings:2.0 x 10^9 revolutions
Connection type:Connector M12, 8-pin, radial
Shaft version:Solid shaft
Permissible Load capacity of shaft:10 N (radial)
5 N (axial)
Electrical data
Electrical interface:HIPERFACE
Operating voltage range/supply Voltage:7 V DC ... 12 V DC
Recommended supply voltage:8 V DC
Operating current:60 mA
Output frequency for sine/cosine signals:0 kHz ... 65 kHz
Without load  
Interfaces
Type of code for the absolute value:Binary
Code sequence:Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
Interface signals:Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
parameter channel RS 485: digital
Ambient data
Working temperature range:-20 °C ... 100 °C
Storage temperature range:-40 °C ... 125 °C, without package
Relative humidity / Condensation:90 %, Condensation not permitted
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration:50 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
EMC:According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating:IP 65, according to IEC 60529, with mating connector inserted
Products specifications
Manufacturer category Sick SKS36
Manufacturer Sick